Coating and Corrosion Protection
For the operation of the geared motors with increased environmental impact the coloring and corrosion protection packages P1..P6 are offered.
| execution | is oriented towards corrosivity category (EN ISO 12944) | typical ambient conditions | Example |
| normal indoor installation | C1 - insignificant | Inside of buildings, neutral atmosphere | Transport systems in factories, Logistic areas, Tool or textile machines |
| P1 Outdoor installation, Covered | C2 - low | Outdoor installation with low contamination, e.g. with roof, Not heated buildings with possible condensation | Sawmills, Trimming lines, Agitators |
| P2 Outdoor installation | C3 - moderate | Environments with high humidity and moderate contamination, Outdoor installations with direct weathering | Facade cleaning systems, Cableways, Gravel plants |
| P3 Outdoor installation,Wet conditions | C4 - strong | Environments with high humidity and occasional severe atmospheric or chemical contamination | Wastewater treatment plants, Mining equipment |
| P4 Chemical stress Wet conditions | C5-I very strong (Industry) | Environment with constant humidity and severe atmospheric or chemical contamination Regular cleaning with chemical cleaning agents | Washing lines for trains maltsters Transport systems in the food industry |
| P5 Coast area | C5-M very strong (Sea) | Port facilities | Port cranes |
| P6 Food processing | Environments with high humidity, chemical and mechanical stress High pressure cleaning USDA approval | Food processing equipment |
Standard color RAL7031 bluegrey, Different colors on request.
For the operation of the geared motors under corrosive environment the following additional options are available:
- Dust- and water protection IP65 for normal and braked motors
- Output shaft / hollow shaft from stainless steel
- double seal on the output shaft
- Servo motors TA: Plug connector M23 from stainless steel