Three phase motors - Motor options

Motor protection

The following motor protection can be supplied:

• TW - PTC thermistor sensor
• TS - Thermorelay (closed)
• KTY - KTY sensor
• PT - PT1000 sensor

Anti condensation heating

• recommended for ambient temperatures below 0°C and at the presence of condensation water
• Motors: DM63..DA225
• Supply voltage: 230V

condensation drain hole

The condensation drain holes are located on the lower side of the motor, depending on the mounting position of the motor.

The condensation drain holes are closed at the factory and must be opened to drain condensate.

high inertia fan

• smooth start-up and braking behavior of the motors at mains operation due to additional inertia Jz
• Motors: DM63..DM112

Protection cowl

The protection cowl prevents the penetration of foreign objects or liquids when the motor is mounted in vertical position.

Motor	L4	AC1
DM63..DM80	26	122
DM90..DM100	30	176
DM112..DM132	30	220
DM160	40	310
DA180..DA225	43	240/338 1)

1) Dimension for forced ventilation

Second shaft end WE and handwheel

The second shaft end can be used for fixing a handwheel or for radial force free transmission of the motor torque.

If radial forces apply to the second shaft end, please consult the manufacturer.

	D13	D14	D15	E13	E14	E15	E16	E17	F13	G13
DM63 DM71	11	100	M4	23	28	16	3.5	44	4	12.5
DM80 DM90 DM100 DM112	14	160	M5	30	35	22	4	44	5	16
DM132	19	160	M6	40	45	32	4	54	6	21.5
DM160	38	250	M12	80	85	70	5	98.5	10	41
DA180 DA200 DA225	38	250	M12	80	90	70	5	98.5	10	41